Working Hours: 10AM - 6 PM (or)
Fill Service Request Form
Application |
Drying of instruments, glassware, rubber tubing post
cleaning and disinfection. Water droplets can interfere with most of
sterilization processes. In steam sterilization excess water presence in the
packs can result in wet loads. |
Model
/ Size |
Ø PT-X.
450 x 450 x 600 mm. Ø PT-XL.
600 x 600 x 600 mm. Ø PT-XXL.
600 x 600 x 900 mm. |
Control
System |
Automatic with Micro PID controller with built in
timer and sensor. Digital safety controller. |
Construction |
The equipment consists of
mild steel frame work supporting the outer cover and inner chamber. The inner
chamber is fabricated from stainless steel SS 304. The outer chamber from epoxy
painted CRCA sheets. All inside edge are curved and all joints are welded and
ground flush. All surfaces are imparted a reflective mirror finish. |
Door |
The drying cabinet is
provided with a quick lock door with heat resistant gasket. |
Air
Circulation |
The chamber design allows uniform air
circulation. The air is circulated by
a centrifugal impeller powered by a single-phase TEFC motor. |
Insulation |
Glass wool insulation, 75 mm thick. |
Exhaust |
An Exhaust is provided at
the top of the unit. The exhaust opens
to ensure complete removal of moisture. |
Heating
System |
S. S. sheathed “U Type” heaters (2KW.) are provided. (500C
to150⁰C)
|
Shelf |
2 Nos. equispaced S. S.
304 shelves are provided. Or as per the model requirements. |
Electricity |
230 V/ 50 HZ/AC Supply. |
Regarding any queries.