Features
Bi Phasic Defibrillator from Allied Medical Ltd
with Adult & Pediatric paddels ,ECG Monitor ,Recorder
Model: Cardiasafe
An ISO13485, CE certified company
Specifications :
• Variable energy level selection (2, 3, 5, 7, 10, 20, 30, 50, 70, 100, 150, 200 Joules)
• Battery capacity – 50 shocks on single Charge
• Adult &paediatric paddles support
• Compact & Light weight : Approx.4.5 Kgs
• Printer Standard
Optional: Non invasive pacing, SPO2, NIBP, AED
Technical Specifications
General
- Display : 320 x 240 pixels, 5.7” Blue LCD with LED backlit
- Display area : 120mm x 90mm
- Dimensions : H180 x W230 x D210mm (max.) without Paddle
- Weight : 4.5 Kgs.
Defibrillator
- Operating Mode : Manual
- Waveform : Biphasic
- Energy : 2 to 200 joules in 12 steps
- Synchronous : Energy delivery begins within 60 ms of the QRS Peak
- Charging Time : Less than 8 seconds
- Paddle Assembly : External paddle assembly with coil retractable high voltage cable
- Adults & Pediatric paddle integrated to same handle
- Check Mode : Manual test mode
- Operation : By front Panel keyboard and paddle buttons
ECG:
- Frequency Response : 0.5 Hz to 40 Hz (ECG)
- Frequency Response : 0.5 Hz to 30 Hz (Paddle)
- Patient isolation : Optical isolation
- Lead selection : Lead I,II and III
- Gain setting : 0.5, 1.0 and 2.0
- CMRR : > 90 db
- Sweep Speed : 12.5, 25.0, 50.0 mm/sec
- Waveform 1 : ECG
- Waveform 2 : 4sec delayed (cascaded)
- Data Output : Analog output of ECG
- Digital filter : Digital signal processing for good quality of ECG
- Freeze mode : To freeze last 4 seconds ECG
Heart Rate
- Range : 30-250 BPM
- Accuracy : +/- 2 BPM
- Resolution : 1 BPM
- Tone : Beep on every QRS detected
- Low alarm Limit Range : 30-245 (step of 5)
- High alarm Limit range : 40-250 (step of 5)
Printer
- Paper Type : Thermal paper 50/55 mm width, 20 meters length
Event Printing
- ECG Mode : Prints 5 Seconds pre & post ECG
ECG in Defib
- Mode : Prints 5 Seconds pre & post ECG
- Defib Mode : Stores & prints 10 Seconds of Defib Shock data i.e. 5 seconds pre critical & 5 seconds post critical Maximum events that can be store Memory of 10 Manual Defib
- Check Mode : Prints the status of Check Mode
- Print Annotates : Time, Date, ECG Lead, Mode, Shock Status & selected Energy
- Delay : 10 Seconds
Power Supply (AC Mains Through Adaptor)
- Input : 150-276VAC, 50Hz, 60Hz, 12V DC for ambulance
- Output : 17V@4A
- Battery : 12V/3.8 Ah Rechargeable
- Back-up time : 3 hours min on full charge in ECG mode /50 shock of 150 Joules in defib mode
- Power consumption : 30 Watts (max) in ECG mode
Optionals
- Non Invasive Pacing
- SPO2
- NIBP
- AED
Environmental Conditions
- Operating Temp. : (-)5 ⁰C ~ (+)50 ⁰C
- Heart Rate Humidity : Up to 95 % non-condensing