|
Construction
|
Steel structure electro statically powder coated or stainless steel or aluminum as per requirement
|
|
Storage Space
|
One drawer for keeping essential anesthesia kit / accessories
|
|
Castors & Foot rest
|
Large roller bearing anti-static castors with front brakes & foot rest
|
|
Table top
|
Stainless steel
|
|
Monitor Shelf
|
Wide monitor shelf at eye level with securing provision
|
|
Cylinder Yokes
|
Color coded gas specific (pin indexed) yokes with sliding stainless steel clamping bars for easy handling
|
|
Addl. Gas Supply
|
Extended platform at rear to hold two 10 ltr. water capacity cylinders
|
|
Non-return cum Minimises risk of back flow of gases, blows off when pressure exceeds 200 Cm H2O
Pressure Relief Valve
|
Minimises risk of back flow of gases, blows off when pressure exceeds 200 Cm H2O
|
|
Regulators
|
Designed for higher efficiency, long service life and reliability, 2 each for O2 and N2O
|
|
Oxygen Flush
|
Emergency oxygen flush switch at table level to give 35-60 Ltrs/min for emergencies
|
|
Ventilator Drive Gas
|
Auxiliary high pressure Oxygen outlets 2 Nos. at 400 kpa ( 4 Bar) at the rear
|
|
02 failure warning alarm
|
Self activated electro-pneumatic audible warning device to indicate drop in O2 pressure below 2.5 Bar
|
|
Nitro Lock
|
It enables N2O to cut off if Oxygen fails
|
|
Hypoxic Guard
|
Mixing device to proportion the N2O in such a way that minimum of 25% O2 is always present in the
breathing gas mixture
|
|
Common Gas Outlet (CGO)
|
Conveniently located Swivel type CGO with ISO tapers for 22 & 15mm connections
|
|
Basal flow with On/off Switch
|
250±50 ml basal flow of Oxygen as soon as machine is switched on. Standard on Jupiter 500 and
optional on Jupiter 200 and 300
|
|
Flowmeter (Rotameter) Tubes
|
Two on Jupiter 200, Three on Jupiter 300 and Five(cascading for O2 and N2O and single for Air) on Jupiter 500 and optional on Jupiter 200 and 300
|
|
Range of Flowmeter
|
Type Oxygen Nitrous Oxide Air
Standard 0.1~10 lpm 0.2~12 lpm
Cascade (low) 0.1 ~1.0 lpm 0.1~1.0 lpm 0.2~15 lpm
Cascade (high) 1~10 lpm 1~10 lpm
|
|
Pipe Line Gas Inlets
|
Non-interchangeable screw threaded (NIST) pipeline inlets one each for O2 , N2O and Air (Optional on Jupiter 200 and standard on Jupiter 300, 500) In case of drop in piped gas pressure the pin index cylinders take over automatically
|
|
Pressure Gauges
|
50mm diameter, color coded gauges fitted at convenient angel for better visibility and clarity. One for each of the pin indexed yokes and one each corresponding to piped gas inlet
|
|
Breathing Circuits
|
Bains circuit provided as standard. Magills antistatic rubber circuit as optional
|
|
Others
|
Hook for breathing circuit, rear bumper, side handles, open/close circuit quick change-over switch. Convenient mounting position for circle absorber
|
|
Dimensions
SS / MS Machines
Aluminium Machines
|
Height Width Depth Work Surface Ht. Weight
1460mm 680mm 600mm 885mm 90 kg
1460mm 680mm 600mm 885mm 50 kg
|
|
MRI Compatibility
|
Jupiter machines can be supplied compatible with MRI on request
|
