Features
· Medical grade ABS plastic framework
· Deep spacious drawer units
· Three gas machine with provision for O , N O and Air
· Wide monitoring shelf at eye level
· Convenient common gas outlet
· Hook for breathing circuit
· Open-Close circuit switch control
· Convenient mounting of circle absorber
· Twin Selectatec mountings for 2 Agent Specific Vaporisers
· Pin Indexed yokes Two for O and One for N O 2 2
· Anaesthetic gas scavenging port
· Large, roller bearing, anti-static castors with front wheel brakes
· Electrical outlets for connecting monitors
· Central pipeline connections with gas specific NIST connectors
· Auxiliary oxygen therapy flowmeter
· Work surface lighting
Technical specifications
Storage Space: Two spacious drawers for keeping essential anaesthesia kit/ accessories
Castors & Foot Rest: Large roller bearing anti-static castors with front brakes & foot rest
Writing Surface: Wide table top for writing
Monitor Shelf : Wide Monitor shelf at eye level
Cylinder Yokes: Color coded gas specific (pin indexed) yokes with sliding stainless steel clamping bars for easy handling.
Holding Two O2 and One N2O 5 Ltr. water capacity cylinders
Non-return/ Pressure Relief Valve: Minimizes risk of back flow of gases, blows off when pressure exceeds 125 CmH2O
Regulators: Designed for higher efficiency, long service life and reliability for O2 and N2O
O2 Flush: Emergency oxygen flush switch at table level to give 30-75 Ltrs/min for emergencies
O2 Failure Warning Alarm: Self activated electro-pneumatic audio visual warning device to indicate drop in O2 pressure below 2.5 Bar
Nitro Lock: It enables N2O to cut off if Oxygen fails
Hypoxic Guard: Mixing device to proportion the N2O in such a way that minimum of 25% O2 is always present in the
breathing gas mixture
Common Gas Outlet (CGO): Conveniently located CGO with ISO tapers for 22 & 15mm connections
Pipeline Gas Inlets: Non-interchangeable screw threaded (NIST) pipeline inlets. In case of drop in piped gas pressure the pin index cylinders take over automatically
Pressure Gauges: Larges diameter, color coded gauges fitted at convenient angle for better visibility and clarity. One for each of the pin indexed yokes and one each corresponding to piped gas inlet
Selectatec Brackets: Twin Selectatec Block
Breathing Circuits: Bains and Closed circuit provided as standard
Ventilator Technical Specifications
· Modes: VCV, PCV, SIMV, Manual
· Electronic PEEP: Settable, 3–30cmH2O
· Waveforms: Pressure, Flow and Volume
· Loops: Pressure vs Volume, Flow vs Volume
· Compensation: Fresh Gas and Compliance
· Tidal Volume: 20ml–1500ml
· Frequency: 1–100 bpm
· I:E Ratio: 1:8–4:1
· Driving Gas: Oxygen (Standard)/ Air (Optional)
· Supply Pressure: 45–100 PSI (310–700 kPa)
· Minute Volume: 0–20 lpm
· Inspiratory Pause: 0–50% of Ti
· Adjustable Pressure Relief: 0–70 cmH2O
· Supply Gas Low: Supply gas (driving gas) has pressure 300 kPa or below
· Respiratory Manometer Pressure Gauge: (-)20–(+)100 cmH2O
· Internal Battery Backup: 120 mins
· Power Supply: 100–250 Volts
· Pressure High: 10–70 cmH2O
· Pressure Low: 10–30 cm H2O
· Mains Fail: Indicates main power failure
· Low Battery: Less than 15 minutes backup
Physical Specification
· Dimensions (mm): 1465 (H) x 720 (W) x 660 (D)
· Work Surface (mm): 815 (H) X 540 (W) x 250 (D)
· Top Shelf (mm): 625 x 320
· Drawer (mm): 490 x 320
· Weight : 120 kg
· Power Consumption: 110W
Cascade Flowmeter
· Oxygen Low Flow: 0.05–1.0 lpm
· Oxygen High Flow: 1–10 lpm
· N2O Low Flow: 0.05–1.0 lpm
· N2O High Flow: 1–12 lpm
· Air: 0.2–15 lpm
